Publication
POLC-A: an assessment of POLCA’s authorization element
| dc.contributor.author | Thürer, Matthias | |
| dc.contributor.author | Fernandes, Nuno O. | |
| dc.contributor.author | Stevenson, Mark | |
| dc.contributor.author | Silva, Cristóvão | |
| dc.contributor.author | Silva, Sílvio do Carmo | |
| dc.date.accessioned | 2019-09-10T14:25:48Z | |
| dc.date.available | 2019-09-10T14:25:48Z | |
| dc.date.issued | 2018 | |
| dc.description | “This is a pre-print of an article published in Journal of Intelligent Manufacturing. The final authenticated version is available online at Springer http://dx.doi.org/10.1007/s10845-018-1402-2 | |
| dc.description.abstract | POLCA (i.e. Paired-cell Overlapping Loops of Cards with Authorization) is a card-based production control approach developed to support the adoption of Quick Response Manufacturing. POLCA’s control mechanism is unique since it combines a card-based element (the paired cell overlapping loops of cards) with a higher-level Material Requirements Planning system for release authorization. POLCA has been applied in practice and evaluated in research, but the loops of cards element (POLC) has been adopted without the authorization element (A). In response, we use simulation to evaluate the effect of POLCA’s authorization element. We show that this element has a direct detrimental effect on percentage tardy and mean tardiness performance. While the literature argues that the authorization element should be an integral part of POLCA, our results suggest the opposite. This has important implications for research and practice. Instead of using POLCA with its authorization element, it is preferable to combine POLC—the card-based element—with a shop floor dispatching rule. | pt_PT |
| dc.description.version | info:eu-repo/semantics/publishedVersion | pt_PT |
| dc.identifier.citation | THÜRER, M. [et al.] (2018) - POLC-A: an assessment of POLCA’s authorization element. Journal of Intelligent Manufacturing. ISSN 0956-5515. Vol. 30, nª 6, p. 2435–2447 | pt_PT |
| dc.identifier.doi | https://doi.org/10.1007/s10845-018-1402-2 | pt_PT |
| dc.identifier.issn | 0956-5515 | |
| dc.identifier.uri | http://hdl.handle.net/10400.11/6653 | |
| dc.language.iso | eng | pt_PT |
| dc.peerreviewed | yes | pt_PT |
| dc.publisher | Springer | pt_PT |
| dc.relation | National Natural Science Foundation of China [grant number 71750410694] | pt_PT |
| dc.relation | FCT—Fundação para a Ciência e Tecnologia of Portugal under the project PEst2015-2020: UID/ CEC/ 00319/ 2013 | pt_PT |
| dc.relation.publisherversion | https://link.springer.com/article/10.1007%2Fs10845-018-1402-2 | pt_PT |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc/4.0/ | pt_PT |
| dc.subject | Order release | pt_PT |
| dc.subject | POLCA | pt_PT |
| dc.subject | Quick response manufacturing | pt_PT |
| dc.subject | Dispatching | pt_PT |
| dc.subject | Card-based control | pt_PT |
| dc.title | POLC-A: an assessment of POLCA’s authorization element | pt_PT |
| dc.type | journal article | |
| dspace.entity.type | Publication | |
| oaire.citation.endPage | 2447 | pt_PT |
| oaire.citation.startPage | 2435 | pt_PT |
| oaire.citation.title | Journal of Intelligent Manufacturing | pt_PT |
| person.familyName | Fernandes | |
| person.givenName | Nuno | |
| person.identifier.ciencia-id | D211-6272-AF3B | |
| person.identifier.orcid | 0000-0002-4682-1790 | |
| person.identifier.scopus-author-id | 14064512000 | |
| rcaap.rights | restrictedAccess | pt_PT |
| rcaap.type | article | pt_PT |
| relation.isAuthorOfPublication | cb1c7a07-e582-476f-96f7-1ed829f55551 | |
| relation.isAuthorOfPublication.latestForDiscovery | cb1c7a07-e582-476f-96f7-1ed829f55551 |