Repository logo
 
Loading...
Profile Picture

Search Results

Now showing 1 - 6 of 6
  • Android library for recognition of activities of daily living: implementation considerations, challenges, and solutions
    Publication . Pires, Ivan M.; Teixeira, M.C.C.; Pombo, Nuno; Garcia, Nuno M.; Flórez-Revuelta, Francisco; Spinsante, Susanna; Goleva, Rossitza; Zdravevski, Eftim
    Off-the-shelf-mobile devices have several sensors available onboard that may be used for the recognition of Activities of Daily Living (ADL) and the environments where they are performed. This research is focused on the development of Ambient Assisted Living (AAL) systems, using mobile devices for the acquisition of the different types of data related to the physical and physiological conditions of the subjects and the environments. Mobile devices with the Android Operating Systems are the least expensive and exhibit the biggest market while providing a variety of models and onboard sensors. Objective: This paper describes the implementation considerations, challenges and solutions about a framework for the recognition of ADL and the environments, provided as an Android library. The framework is a function of the number of sensors available in different mobile devices and utilizes a variety of activity recognition algorithms to provide a rapid feedback to the user. Methods: The Android library includes data fusion, data processing, features engineering and classification methods. The sensors that may be used are the accelerometer, the gyroscope, the magnetometer, the Global Positioning System (GPS) receiver and the microphone. The data processing includes the application of data cleaning methods and the extraction of features, which are used with Deep Neural Networks (DNN) for the classification of ADL and environment. Throughout this work, the limitations of the mobile devices were explored and their effects have been minimized. Results: The implementation of the Android library reported an overall accuracy between 58.02% and 89.15%, depending on the number of sensors used and the number of ADL and environments recognized. Compared with the results available in the literature, the performance of the library reported a mean improvement of 2.93%, and they do not differ at the maximum found in prior work, that based on the Student’s t-test. Conclusion: This study proves that ADL like walking, going upstairs and downstairs, running, watching TV, driving, sleeping and standing activities, and the bedroom, cooking/kitchen, gym, classroom, hall, living room, bar, library and street environments may be recognized with the sensors available in off-the-shelf mobile devices. Finally, these results may act as a preliminary research for the development of a personal digital life coach with a multi-sensor mobile device commonly used daily.
  • Smartphone-based automatic measurement of the results of the timed-up and go test
    Publication . Ponciano, Vasco Rafael Gaspar; Pires, Ivan M.; Ribeiro, Fernando Reinaldo; Garcia, Nuno M.; Pombo, Nuno; Spinsante, Susanna; Crisóstomo, Rute
    The Timed-Up and Go test is a very used test in the physiotherapy area. For the measurement of the results of the test, we propose to use a smartphone with several embedded sensors, including accelerometer, magnetometer, gyroscope, a Bitalino device with the Electromyography (EMG) and Electrocardiography (ECG) sensors, and a second Bitalino device with a pressure sensor connected and positioned in the back of the chair. This architecture allows to capture several types of data from the sensors easily. In this paper, we present a structured method to implement the measurement of the different parameters involved in the Timed-up and Go test, for acquiring, processing and cleaning the collected measurements. This data will help in the classification of the test results initially, and later on to discover more complex patterns and related conditions, such as equilibrium changes, neurological pathologies, degenerative pathologies, lesions of lower limbs and chronic venous diseases.
  • Experimental study for determining the parameters required for detecting ECG and EEG related diseases during the timed-up and go test
    Publication . Ponciano, Vasco Rafael Gaspar; Pires, Ivan M.; Ribeiro, Fernando Reinaldo; Villasana, María Vanessa; Teixeira, M.C.C.; Zdravevski, Eftim
    The use of smartphones, coupled with different sensors, makes it an attractive solution for measuring different physical and physiological features, allowing for the monitoring of various parameters and even identifying some diseases. The BITalino device allows the use of different sensors, including Electroencephalography (EEG) and Electrocardiography (ECG) sensors, to study different health parameters. With these devices, the acquisition of signals is straightforward, and it is possible to connect them using a Bluetooth connection. With the acquired data, it is possible to measure parameters such as calculating the QRS complex and its variation with ECG data to control the individual’s heartbeat. Similarly, by using the EEG sensor, one could analyze the individual’s brain activity and frequency. The purpose of this paper is to present a method for recognition of the diseases related to ECG and EEG data, with sensors available in off-the-shelf mobile devices and sensors connected to a BITalino device. The data were collected during the elderly’s experiences, performing the Timed-Up and Go test, and the different diseases found in the sample in the study. The data were analyzed, and the following features were extracted from the ECG, including heart rate, linear heart rate variability, the average QRS interval, the average R-R interval, and the average R-S interval, and the EEG, including frequency and variability. Finally, the diseases are correlated with different parameters, proving that there are relations between the individuals and the different health conditions.
  • Mobile computing technologies for health and mobility assessment: research design and results of the ttmed up and go test in older adults
    Publication . Ponciano, Vasco Rafael Gaspar; Pires, Ivan M.; Ribeiro, Fernando Reinaldo; Villasana, María Vanessa; Crisóstomo, Rute; Teixeira, M.C.C.; Zdravevski, Eftim
    Due to the increasing age of the European population, there is a growing interest in performing research that will aid in the timely and unobtrusive detection of emerging diseases. For such tasks, mobile devices have several sensors, facilitating the acquisition of diverse data. This study focuses on the analysis of the data collected from the mobile devices sensors and a pressure sensor connected to a Bitalino device for the measurement of the Timed-Up and Go test. The data acquisition was performed within different environments from multiple individuals with distinct types of diseases. Then this data was analyzed to estimate the various parameters of the Timed-Up and Go test. Firstly, the pressure sensor is used to extract the reaction and total test time. Secondly, the magnetometer sensors are used to identify the total test time and different parameters related to turning around. Finally, the accelerometer sensor is used to extract the reaction time, total test time, duration of turning around, going time, return time, and many other derived metrics. Our experiments showed that these parameters could be automatically and reliably detected with a mobile device. Moreover, we identified that the time to perform the Timed-Up and Go test increases with age and the presence of diseases related to locomotion.
  • Recognition of activities of daily living and environments using acoustic sensors embedded on mobile devices
    Publication . Pires, Ivan M.; Marques, Gonçalo Santos; Garcia, Nuno M.; Pombo, Nuno; Flórez-Revuelta, Francisco; Spinsante, Susanna; Teixeira, M.C.C.; Zdravevski, Eftim
    The identification of Activities of Daily Living (ADL) is intrinsic with the user’s environment recognition. This detection can be executed through standard sensors present in every-day mobile devices. On the one hand, the main proposal is to recognize users’ environment and standing activities. On the other hand, these features are included in a framework for the ADL and environment identification. Therefore, this paper is divided into two parts—firstly, acoustic sensors are used for the collection of data towards the recognition of the environment and, secondly, the information of the environment recognized is fused with the information gathered by motion and magnetic sensors. The environment and ADL recognition are performed by pattern recognition techniques that aim for the development of a system, including data collection, processing, fusion and classification procedures. These classification techniques include distinctive types of Artificial Neural Networks (ANN), analyzing various implementations of ANN and choosing the most suitable for further inclusion in the following different stages of the developed system. The results present 85.89% accuracy using Deep Neural Networks (DNN) with normalized data for the ADL recognition and 86.50% accuracy using Feedforward Neural Networks (FNN) with non-normalized data for environment recognition. Furthermore, the tests conducted present 100% accuracy for standing activities recognition using DNN with normalized data, which is the most suited for the intended purpose.
  • Data acquisition of timed-up and go test with older adults: accelerometer, magnetometer, electrocardiography and electroencephalography sensors’ data
    Publication . Ponciano, Vasco Rafael Gaspar; Pires, Ivan M.; Ribeiro, Fernando Reinaldo; Garcia, Nuno M.
    We present a dataset related to the acquisition of different sensors data during the performance of the Timed-Up and Go test with the mobile device positioned in a waistband for the acquisition of accelerometer and magnetometer data, and a BITalino device positioned in a chest band for the acquisition of Electrocardiography and Electroencephalography for further processing. The data acquired from the BITalino device is acquired simultaneously by a Bluetooth connection with the same mobile application. The data was acquired in five institutions, including Centro Comunitário das Lameiras, Lar Nossa Senhora de Fátima, Centro Comunitário das Minas da Panasqueira, Lar da Misericórdia da Santa Casa da Misericórdia do Fundão, and Lar da Aldeia de Joanes da Santa Casa da Misericórdia do Fundão from Fundão and Covilhã municipalities (Portugal). This article describes the data acquired from a several subjects from the different institutions for the acquisition of accelerometer and magnetometer data, where each person performed the Timed-Up and Go test three times, where each output from the sensors was acquired with a sampling rate of 100 Hz. Related to the data acquired by the sensors connected to the BITalino device, 31 persons performed the different experiments related to the Timed-Up and Go Test. Following the data acquired from Electroencephalography and Electrocardiography sensors, only the data acquired from 14 individuals was considered valid. The data acquired by a BITalino device has a sampling rate of 100 Hz. These data can be reused for testing machine learning methods for the evaluation of the performance of the Timed-Up and Go test with older adults.